iLive M-ACE Option Instructions AP7652 issue 2 3
Cable and connectors
ACE is compatible with CAT5e T568A and T568B twisted pair cable
standards. For on the road reliability and protection choose a heavy
duty touring grade cable type.
Maximum length = 120m (400 feet) depending on cable type. Most
good quality CAT5 cables should work reliably to around 40m (130
feet). We do not guarantee that all cable types will work reliably at
longer lengths.
Two cable types we have tested to 120m and recommend are:
Neutrik EtherFlex SFTP CAT5e (www.neutrik.com)
Belden Cat Snake 1305a (www.belden.com)
A tour grade connector combination we recommend is the Neutrik
Ethercon (XLR type locking shell) with Hirose RJ45 TM21P-88P (21)
(www.hiroseconnectors.com)
Patching signals to/from Port B
iLive recognises the type of the option cards fitted. Details are
displayed on the Surface TouchScreen Status page.
Status Connection status is indicated. A green dot = no errors
detected. Orange dot = 1x error, Red dot = more than 1x error
during the last 3 minutes. A green tick = A TCP/IP network bridged
to connect via the ACE cable has been detected. A red cross
indicates errors associated with the bridge connection.
Patching signals to Port B Use the TouchScreen or Editor
OUTPUTS screen Port B tab. You can assign one or a range of
signals to the 64 ACE channels by choosing selections from the
drop down menu. For a digital mic split it is typical to choose
MixRack Inputs (the signal immediately after the preamp).
Remember to touch Apply after making changes.
Patching signals from Port B to the iLive Source selections in
several places within the iLive system are made using drop down
menus. These include selection from the 64 ACE channels if the
ACE card has been fitted to Port B. For example, you can patch
ACE channels as sources to the mono or stereo IP channels, Mix Ext
Inputs, Talkback or Ext Source to PAFL..
The input and output patching including Port B is archived within the
Show memories and can be stored in the Scenes ‘Patchbay’ item.
This product complies with the European
Electromagnetic Compatibility directives 89/336/EEC &
92/31/EEC.
Copyright© 2009 Allen & Heath Ltd. All rights reserved.
For further information refer to www.allen-heath.com
NOTE: Any changes or modifications to the
equipment not approved by Allen & Heath could void
the compliance of the equipment. Whilst we believe
the information in these instructions to be reliable we
do not assume responsibility for inaccuracies. We also
reserve the right to make changes in the interest of
further product development.
A&H part AH7001 Standard 1.8m cable
A&H part AH7000 80m drum EtherFlex
(2 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals