Allenheath MIXWIZARD3 20S User Manual download pdf (Page 8)

8 WZ

20S User Guide

Installing the Console

Free Standing

The console is supplied ready for free standing operation with its side trims fitted and

connector pod positioned for rear access. If you are converting from rack to free standing

then make sure the pod is correctly rotated and secured, and the side trims fitted as shown

below:

19” Rack Mount

For rack mounting, remove the two side trims and rotate the pod into the connector position

preferred. Allow enough space for the cables and connectors behind the console.

Do not transport the console with its connector pod securing screws removed. Do not

attempt to remove the connector pod from the console. Do not obstruct the ventilation slots.

Allow adequate space around the console for air flow. If the side-trims are to be removed,

do not re-fit the (2x M4x10 and 6x M4x8) fixing screws to the unit. Please retain and store

these screws in case the side-trims need to be re-fitted in the future.

194

514

530

ROTATE POD AND REFIT SECURING SCREWS

RELEASE M4 POZI SCREW EACH SIDE

FIT SIDE TRIMS - 4x M4 POZI SCREWS PER SIDE

CONSOLE WIDTH = 507mm

101.6165.1101.637.7

482.6 (19" RACK)

444

(10U)

193

497

(11.2U)

SECURE IN RACK USING 8x M6 BOLTS

USE PLASTIC CUP WASHERS TO PROTECT THE PANEL

122

193

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 31 32

No comments

Allenheath MIXWIZARD3 20S User Manual Page 8