Allenheath DR66 USER GUIDE User Manual Page 18
- Page / 44
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
18 DR66 & DR128 Installer User Guide
Calibration Adjustments Available
DR66
Parameter Adjust Factory Default Setting
Mic Input Gain 1-2 Internal trimmer Gain minimum Fully anti-clockwise
Mic/Line Pad 1-2 Pair of internal links Pad disabled (Mic) Links fitted
Mic Phantom Power 1-2 Internal link Phantom Power On Link fitted
Line Input Level 3-6 Internal link -10dBV sensitivity Link not fitted
Line Output Level 1-6 Internal link +4dBu nominal Link not fitted
DR128
Parameter Adjust Factory Default Setting
Mic Input Gain 1-8 Rear panel trimmer Gain minimum Fully anti-clockwise
Mic/Line Pad 1-8 Pair of internal links Pad disabled (Mic) Links fitted
Mic Phantom Power 1-8 Internal link Phantom Power On Link fitted
Line Input Level 9-12 Internal trimmer -10dBV sensitivity Fully clockwise
Line Output Level 1-8 Internal trimmer +4dBu nominal Fully anti-clockwise
Removing the Top Cover
The DR hardware is configured by setting internal jumper links and calibration trimmers. Optional
cards can be plugged into circuit board slots to expand the DSP processing power. To access
these remove the top cover using a crosspoint screwdriver to remove the fixing screws. Slide the
cover back and carefully lift it off. Refit the cover after configuration.
WARNING: Do not remove the power unit covers. Remove and refit the
top access cover and reposition the internal jumper links with power to the unit
switched off. Only apply power when calibrating the audio signal levels.
- DR66 & DR128 1
- Limited One Year Warranty 2
- Introduction 3
- The Mains Voltage Setting 5
- Welcome to the DR Series 6
- System Block Diagram 8
- Basic Principles 9
- Front Panel 10
- DR66 11
- DR128 11
- Rear Panel 12
- Installation 14
- Connecting Mains Power 15
- Connecting a DC Supply 15
- Connections and Cables 16
- Earthing 16
- Configuring the Hardware 17
- Removing the Top Cover 18
- Labelling the Function Keys 19
- Selecting Mic/Line Pad 20
- Selecting Phantom Power 20
- Calibrating Line Input Gain 21
- XLR Output Connections 22
- Calibrating Output Level 22
- Remote Switches 23
- Remote Outputs 24
- Configuring the Software 26
- Starting WinDR 27
- Using WinDR 28
- Configuring Control 29
- The Front Panel Display 30
- █ █ █ █ ▌ _ _ _ _ _ ↓↑ 31
- █ █ _ _ _ _ _ _ _ _ ↓↑ 31
- █ █ █ █ ▌ _ _ _ _ _ ↑ 32
- █ █ █ █ ▌ _ _ _ _ _ ↓ 32
- The Function LEDs 33
- DR Version 2.00 34
- *** SETUP *** 34
- *1 LCD Contrast 34
- Password 38
- Operation 38
- Installation Log Sheet 42
- Visit our Web Site: 44
Related products and manuals for Control panel Allenheath DR66 USER GUIDE
Control panel Allenheath GL2800 User Manual
(42 pages)
(42 pages)
Control panel Allenheath ACE User Manual
(4 pages)
(4 pages)
Control panel Allenheath DANTE User Manual
(12 pages)
(12 pages)
Control panel Allenheath GL2400 User Manual
(40 pages)
(40 pages)
Control panel Allenheath GR05 User Manual
(24 pages)
(24 pages)
Control panel Allenheath GLD-80 User Manual
(36 pages)
(36 pages)
Sony KDL-55W800B podręczniki
Instrukcje obsługi i podręczniki użytkownika dla Odtwarzacze DVD Sony KDL-55W800B.
Dostarczamy pdf podręczników Sony KDL-55W800B do pobrania za darmo według typów dokumentów:
Comments to this Manuals