Allenheath ZED-10FX User Manual download pdf (Page 22)

Allen & Heath 22 ZED-10FX User Guide

ZED-FX EFFECTS PROCESSOR

PARAMETER (HOLD)

TAP

SEL

168

7 15

4 12

1 9

Dly+verb (level)

Dly+verb (size)

Dly+verb (regen)

PingPong(regen)

BeatDly (regen)

Ambient (echo)

SlapVerb (size)

DoubleZED(size)

Plate (decay)

Plate (predly)

Plate (colour)

Hall1 (size)

Hall2 (size)

Arena (size)

Flanger (dpth)

Chorus (dpth)

Bank 9-16

TAP

AUX

+10

FX to

Record

Listen

LEVEL

Effects Type Selection LED.

8 Green LED’s show one of 16 effects types available. If the

Bank LED is off the green LED’s will show one of 1 to 8 on

the effects list (or off if no LED’s are lit), if the Bank LED is

on the green LED’s will show which of effects types 9 to 16

is selected. For effects types 1 to 5, the green LED will

blink in time with the tempo of the delay time.

The green LED’s also display the level of the parameter

adjustment when the TAP button is held down. The more

LED’s that illuminate, the more the parameter is increased

in value or intensity.

Bank LED.

The Bank LED illuminates when one of the effects type 9 to

16 is selected. If the Bank LED is on, then the green LED

will show which effect is selected from the list.

SEL Buttons.

The SEL buttons select the type of effect. They also adjust the pa-

rameter of the selected effect when the TAP button is held down.

TAP Button.

The TAP button is used in two ways. If one of effects types 1 to 5

are selected then the TAP button can be used for adjusting the

frequency or tempo of the delay parameter.

If the TAP button is held down, the SEL buttons then become pa-

rameter adjust buttons to increase or decrease the level of the

parameter assigned to the selected effect.

FX to AUX Send control.

This adds some of the effect to the Aux bus, so if the Aux is being

used for a monitor for a singer for example, the performer will be

able to hear their voice with some reverb added.

Effects Level.

Controls the volume of the effects (wet) signal to the main stereo

Mix and the Record bus.

Listen

Switches the Effects (wet) signal to the headphones or monitor

output circuit for checking the effect.

Record

Switches the Effects (wet) signal to the stereo Record bus.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 31 32

Comments to this Manuals

No comments

Allenheath ZED-10FX User Manual Page 22

Comments to this Manuals

Related products and manuals for Control panel Allenheath ZED-10FX