Allenheath GL3300-8GD User Manual

GL3300 8GD OPTION The 8GD option enables access to all 8 group outputs from a single 25 way D type connector. Please no

GL3300 8GD OPTION 2 FITTING THE 8GD OPTION The 8GD option is supplied as a pre-tested assembly to be installed in the Allen & Heath GL3300 conso

GL3300 8GD OPTION 33. REMOVE THE CONSOLE BASE Before installing the option, remove all power to the console and disconnect any signal cables where nec

GL3300 8GD OPTION 4 6. LOCATE MONO INPUT CONNECTOR CIRCUIT BOARD ASSEMBLY The 8GD circuit board assembly mounts onto the mono input connector circuit

GL3300 8GD OPTION 58. SOLDERING THE 8GD WIRING HARNESS Connect the harness wires to the appropriate pads on the Group circuit board assemblies. (see

GL3300 8GD OPTION 6 9. FITTING THE ‘D’ TYPE CONNECTOR Form the ribbon harness over the 8GD circuit board assembly and mount the 25 way ‘D’ type conn