Allenheath WZ14-4-2 User Manual download pdf (Page 19)

WZ14:4:2 USER GUIDE 19

OPTIONS

The Mix Wizard Series WZ14:4:2 has a versatile architecture designed to satisfy your live

sound and recording requirements without modification. The following internal options are

offered to provide alternative settings for those applications which may demand them.

These options require resoldering of circuit board links and should only be carried out by

competent technical personnel. Further information is available from your service agent or

the WZ14:4:2 SERVICE MANUAL.

CHANNEL PRE-FADE AUX SEND OPTIONS

The Pre-fade aux sends are set post-EQ and post-ON as standard. However, link options

on each mic/line channel 1-10 and stereo channels 11-12 and 13-14 circuit board

assemblies allow pre-EQ and/or pre-ON if required.

STEREO CHANNEL AUX SENDS

The stereo input channels allow stereo input signals to feed the auxiliaries as stereo pairs.

By removing a link the left input signal will feed AUX 1, 3, 5, and the right input signal will

feed AUX 2, 4, 6.

CHANNEL DIRECT OUTPUT SOURCE

The direct outputs are sourced post-fader as standard. A link option is available on each

channel assembly to select a pre-fade source.

SYS-LINK

OPTION

The SYS-LINK

option is an internally fitted circuit board and wiring harness which can

easily be installed by your service agent. The SYS-LINK

option allows up to five ALLEN &

HEATH consoles to be electronically connected together via a 25 pin D type multiway

interconnecting cable to provide more inputs to the mix.

RIAA OPTION

An RIAA PCB assembly plus earth post can be fitted to input A of each of the two stereo

input channels to allow connection for a turntable. Contact your dealer or service agent.

1 2 ... 14 15 16 17 18 19 20 21

No comments

Allenheath WZ14-4-2 User Manual Page 19