Allenheath XONE 42 User Manual download pdf (Page 16)

Allen & Heath 16 XONE:42 User Guide

HEADPHONE SECTION

Cue Active LED

This LED lights to indicate that one of more of the input

and / or mic channels is being monitored in the head-

phones.

Headphone Outputs

Stereo 1/4” TRS jack and 3.5mm mini-jack. Plug in good

quality stereo headphones intended for DJ monitoring.

Use closed-ear headphones that provide maximum

acoustic isolation when cueing your sources. We rec-

ommend that you use high quality headphones rated be-

tween 30 to 100 ohms impedance. 8 ohm headphones

are not recommended.

Split Cue Switch

Press this switch to change the way Cue operates. Nor-

mally, pressing a channel Cue switch overrides both left

and right monitor program signals with the stereo cue

signal. With the switch pressed, Cue overrides just the

left channel leaving the program in the right channel.

The left monitor meter displays the cue signal, right dis-

plays program. This is very useful when beat mixing us-

ing headphones.

Cue / Mix Control

Allows the main mix output to be added to the Cue sig-

nal. Turned fully anticlockwise, only the active Cue is

heard through the headphones when Cue is active.

Gradually turning clockwise introduces the main mix

output to the headphones, together with the active Cue.

Selecting Split Cue will automatically override this con-

trol.

Headphones Level Control

Adjusts the level of the signal in the stereo headphones.

This does not affect the level of the local booth monitor.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 27 28

No comments

Allenheath XONE 42 User Manual Page 16