Allenheath GLD-112 Reference Guide User Manual download pdf (Page 3)

GLD Touch Screen Reference V1.4 – Issue 1 3 ALLEN&HEATH

1. Power Up Screens

The Home screen will appear on power up If no password

is set.

The Login screen will appear when you:

Power up when the current User has a password set

Unlock the surface when a password is set

Change user from the Home screen

Users List

The list shows available Users. The Admin User is always

displayed. Up to 9 other Users that have been made ‘Active’

by Admin will also display in the list. Icons show if the User

has a password or User Scene set.

Password – If one is set it needs to be entered using the

screen keypad when the user logs in.

User Scene – If a User Scene is set it is recalled

automatically on login when the user is changed. It does

not recall when the same user logs in, or when the system

is powered up again while the same user is current.

A User Scene can be set by Admin to ensure a pre-

determined layout and starting point loads when a different

user logs in.

Permissions – Access to selected functions and

parameters can be restricted for each User. This is

configured by Admin using the Setup screen.

Not Shut Down Correctly reminder screen

If the GLD was last switched off without it being first shut

down using the Home screen Power Down button this

screen will appear on power up. The GLD will continue to

boot after a 10 second count down. Choose to start

immediately using the Start GLD button, or go to the

Advanced page if you wish to fully reset the system.

1 2 3 4 5 6 7 8 ... 54 55

No comments

Allenheath GLD-112 Reference Guide User Manual Page 3