Allenheath GLD-112 Reference Guide User Manual download pdf (Page 8)

GLD Touch Screen Reference V1.4 – Issue 1 8 ALLEN&HEATH

Source

Select

Channel

Preamp

Input Socket

Trim

48V

Pad

Gain

AudioRack or Surface

Pol

GLD

3.5 Channel Libraries

Libraries let you store and recall presets for individual

processing blocks such as EQ and Compressor, and also

for the whole Input or Mix channel.

Input and Mix channel processing Libraries do not store

routing, levels or assignments.

The Library window lists available presets. Input and mix

channel Libraries are accessed from their Overview page.

Touch the Library button to open the Library window. Touch

Exit Library to close the window.

The list shows 3 types of Library:

Factory (cannot be deleted)

User (stored in memory in the GLD)

USB (accessed directly from the USB key)

Touch to select a Library item and use the buttons to Recall

or Overwrite the item. Touch Store New to store a new User

Library item. Use the name keypad to apply a name of up to

8 characters.

User and USB Libraries cannot be deleted from this page.

Go to the Setup / Memory / Library Manager page to

delete and rename Libraries or transfer them between the

GLD and a USB key.

Input Library Preamp recall – Input Libraries store the

Preamp settings and all channel processing including HPF,

Gate, PEQ, Compressor and Delay. The Recall Preamp

button gives you the option to include or exclude Preamp

settings when recalling the Library.

The Recall Preamp button setting is remembered when

changing channels.

3.6 Preamp page

The Preamp page provides access to the Input Channel

source patching, socket Preamp settings, and channel Trim

and HPF.

Touch a control box to highlight a

parameter then turn the screen Rotary to

adjust its value.

Socket Source – Open the drop-down

menu to choose which source to patch to

the channel. Touch Apply to accept or

Cancel to leave unchanged.

Sources that can be patched:

An AudioRack input (via dSNAKE)

A GLD rear panel input

An I/O Port input

The USB stereo playback

One of the built-in effects (Rack FX)

The Signal Generator (as a test source)

The output of any Mix

To provide a simple starting point the Template Show

default is one-to-one mapping between input sockets and

channels. For example, Socket 1 to Channel 1, Socket 2 to

Channel 2 and so on.

Socket Preamp – If the patched source is a Mic/Line XLR

input then its Preamp controls are shown. These provide

remote control of the input preamp circuit located at the

socket.

Gain – Touch to highlight the Gain value box. Turn the

screen Rotary to adjust.

Phantom power - Touch and hold the 48V button for 1

second. This is to prevent accidental operation.

Pad switches in a 20dB input attenuator. The combined

Gain+Pad value is shown in the Gain box.

Preamp Safe – Touch this button to make Preamp Gain

Pad and 48V settings safe from Scene recall. This can be

useful when splitting the same mic preamp to two or more

channels.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 54 55

Comments to this Manuals

No comments

Allenheath GLD-112 Reference Guide User Manual Page 8

Comments to this Manuals

Related products and manuals for Equipment Allenheath GLD-112 Reference Guide