Allenheath GLD-112 Reference Guide User Manual download pdf (Page 30)

GLD Touch Screen Reference V1.4 – Issue 1 30 ALLEN&HEATH

6. I/O Screen

6.1 dSNAKE I/O page

Use this screen to patch Input and Output sockets on the

main AudioRack connected to the GLD via its dSNAKE port.

The panel background turns grey if the AudioRack is not

connected. This means you can assign the sockets even if

the rack is not plugged in.

AR2412 Main AudioRack - 24 Mic/Line inputs and 12 XLR

Line outputs.

The socket number and its assigned source or destination

name and colour is displayed for each socket.

SOURCES pull-up window

An input socket could be assigned to multiple destinations,

for example to one or more channels and the I/O Port. Use

the pull-up to see a list of all destinations for a highlighted

input socket.

Note You can patch a single input socket to more than one

channel or destination, but you can patch only one socket

to a single channel or destination.

Input sources can also be patched using the Preamp page

for each channel. This method may be preferred.

Patching Outputs - Touch an output socket to highlight it.

Use the lower part of the screen to select the GLD signal to

assign to that socket. Open the menu to scroll through and

select from the available sources. Choose the source

number using the Start box and screen rotary.

To assign a range of output sockets touch the End box and

turn the screen rotary. The sockets about to be assigned

are highlighted on the screen.

Touch Apply to accept the assignment or Cancel to discard

the change.

Touch the Polarity button to reverse the polarity of a

highlighted output socket. This affects the socket only, not

the source assigned to it.

Patching Inputs - Touch an input socket to highlight it.

Use the lower part of the screen to select the channel

to assign the socket to. Choose the channel number using

the Start box and screen rotary.

To assign a range of input sockets touch the End box and

turn the screen rotary. The sockets about to be assigned

are highlighted on the screen.

Touch Apply or Cancel to accept or discard the change.

6.2 dSNAKE EXPANDER page

Use this screen to patch input and output sockets on an

AR84 AudioRack plugged into the EXPANDER port on the

main AR2412 rack connected to the dSNAKE port.

The AR84 uses the first row of sockets. The second row is

not used.

AR84 Expander AudioRack connected to the AR2412

EXPANDER Port – 8 Mic/Line inputs and 4 XLR Line

outputs.

6.3 Surface / EXPANDER page

Patch Input and Output sockets on the GLD surface and on

an AR84 AudioRack connected via the surface Expander

port using this screen.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 54 55

Comments to this Manuals

No comments

Allenheath GLD-112 Reference Guide User Manual Page 30

Comments to this Manuals

Related products and manuals for Equipment Allenheath GLD-112 Reference Guide