Allenheath GLD-112 Reference Guide User Manual download pdf (Page 47)

GLD Touch Screen Reference V1.4 – Issue 1 47 ALLEN&HEATH

10.6 Surface Preferences Setup page

Use the Surface Prefs page to choose the function of the

fader strip Custom Rotary and the Alt View key, and to link

fader banks.

Strip Rotary control

Each GLD surface strip has a rotary control above the fader

for instant access to important controls while mixing.

Custom Rotary Functions - The fader strip Rotary control

function is selected using 4 keys between the GLD Fader

Banks. These are:

Gain – Preamp Gain control

Pan – Main LR mix Pan control

Custom 1 – User assigned

Custom 2 – User assigned

To assign Custom Rotary functions – Use the drop-down

menu to select the function:

Unused – Rotary not assigned

Direct Out – Input channel Direct Output level

Send Level – Aux or FX sends

HPF Frequency

Compressor Threshold

Touch Apply to accept or Cancel to discard the change.

To link Fader Banks – Touch the Layer Link buttons to link

or unlink the layers across the fader banks. When two

banks are linked, selecting a layer key on either bank will

select that layer across both fader banks.

The Surface Preferences are remembered on power down

and are stored in Show memories. They are not stored in

Scene memories.

Alt View key

This key situated between the GLD surface Fader Banks

provides an alternative information display on the fader strip

LCD while it is held.

To choose an Alt View option – Open the drop-down

menu and touch an item to select it.

Alt View display options – The strip LCD normally displays

the channel name. Pressing and holding Alt View will

temporarily replace the name with one of the following

options:

DSP Channel – Processing channel number

dB Value – Fader position dB value

Socket ID – Source socket number

Strip LCD display Socket ID codes (nn = number):

S-nn = Physical socket

P-nn = I/O Port

FX-n = Rack FX

USB = USB key playback

NotAs = Not assigned, or SigGen assigned

10.7 MIDI Setup page

Use the MIDI Setup page to assign the MIDI channel

number and operate the MIDI Transport controls.

To change the MIDI Channel – Touch the MIDI Channel

box. Turn the Rotary to select the required channel number.

Touch Apply to accept or Cancel to leave unchanged.

MIDI Transport controls – Touch these buttons to send

out the related MIDI message on the GLD MIDI port.

The following functions can be controlled using MIDI. These

can also be controlled with similar messages using TCP/IP

using the GLD Network port.

• Fader levels NRPN (Input, Master, FX, DCA)

• Mutes Note On (Input, Master, FX, DCA)

• Send levels NRPN (Aux and FX sends)

• DCA assign NRPN

• Input to Main On NRPN

• Preamp Gain Pitchbend

• Preamp Pad, 48V Sysex

• Name & Colour Sysex

• Scene Recall Program Change

• MIDI transport MIDI Machine Control

• Mix Select Polyphonic Key Pressure

Refer to www.allen-heath.com for the MIDI protocol.

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 53 54 55

Comments to this Manuals

No comments

Allenheath GLD-112 Reference Guide User Manual Page 47

Comments to this Manuals

Related products and manuals for Equipment Allenheath GLD-112 Reference Guide